Xtreme Mudder 1103-20-CAP Center Cap Identification Guide
Shopping for a 1103-20-CAP center cap is not a “looks close enough” decision.
Here is the useful starting point: the listing names Xtreme Mudder, identifies 1103-20-CAP, LG1607-49 and lists a Gloss Black finish. The remaining fitment work is a physical comparison, not a guess.
Here is the blunt truth: a similar-looking part is not a confirmed match.
View the current Xtreme Mudder 1103-20-CAP center cap listing
The known facts in one place
| Product | Wheel Center Cap |
|---|---|
| Brand / manufacturer | Xtreme Mudder |
| Part number(s) listed |
1103-20-CAP, LG1607-49
|
| Store SKU | 1103-20-CAP LG1607-49 Gloss Black |
| Finish / color | Gloss Black |
| Sold as | Sold individually |
| Condition | New replacement item |
1103-20-CAP and the other listed identifiers
The current product record tells shoppers to verify 1103-20-CAP, LG1607-49. Do not silently drop a suffix or choose only the shortest number because it is easier to type. Record every identifier shown on your original item, then compare the complete set with the live listing.
These numbers appear together in this listing. That does not prove that every item carrying only one of them is universally interchangeable. The physical design still has to match.
The listed finish is Gloss Black
The product record describes the finish as Gloss Black. That wording matters when you are replacing one item instead of a complete set. “Black” is not specific enough when gloss, matte, satin and mixed-finish parts can look very different beside one another.
Compare the live product image with the surviving parts in neutral daylight. Also compare the logo and any decorative details that are actually visible. Lighting, dust and years of exposure can make the same finish photograph differently.
Mounting style is not confirmed in the supplied listing
The product record does not identify a specific attachment style. We are not going to turn a photo into a claim about clips, tabs, bolts or screws. Compare the back of the original item with every available product image and ask for confirmation if the mounting design is not visible.
How many pieces does the listing describe?
The product record says Sold individually. Quantity language matters: a product photograph may show more than one angle or component without promising that every pictured item is included.
What this product record does not establish
The supplied listing does not state an exact cap diameter, height or depth, the material, a confirmed attachment style or whether mounting hardware is included. Those are reasons to verify—not invitations to guess.
If one of those details decides fitment, compare the original item directly with the live product photos or contact WheelCenterCaps.com before ordering.
Turn the listing into a practical identification record
If the original is gone, the job changes. Record the wheel brand, photograph the center opening straight on and capture every visible mounting point. Then use 1103-20-CAP, LG1607-49 and 1103-20-CAP LG1607-49 Gloss Black to locate the exact listing. Without the old cap, an unsupported assumption about depth or retention should remain unresolved until the seller can compare your wheel photos.
Keep the full code together when searching. Spaces, dashes and suffixes may be formatted differently, but dropping the final letters can mix finishes or neighboring cap families into the results. Compare the product itself after search formatting has been normalized.
When uncertain: send the seller the complete code, wheel photos and a side profile. A precise question is far easier to answer than “Will this fit my truck?”
Details to capture before this part goes in the cart
Depth needs a reference surface. If clearance matters, photograph the original beside a straightedge and state whether height was measured from the face, the mounting surface or the deepest rear point. Different reference points can produce different numbers for the same wheel center cap. Do not call them a conflict until the method is the same.
Check center clearance when it is relevant. If an axle end, locking hub or other component projects through the wheel center, include that clearance in the comparison. The supplied listing does not promise an open-end conversion or extra internal room unless it states one. Ask before modifying the new part.
Decide whether one replacement will look intentional. A new Gloss Black part may sit beside three weathered originals. That cosmetic difference does not establish bad fitment, but it can affect whether a single or full-set purchase meets your goal. Confirm Sold individually before assuming the listing solves either option.
Name every measurement. “Eight inches” is not useful unless both people know whether it means the face, the rear skirt or a mounting circle. Label the start and end points in your photo and keep the ruler in the same plane as the feature. The supplied record should not be supplemented with an unlabeled number from a different listing.
Label the removed part. If the old wheel center cap will be off the wheel for several days, store it with its fasteners or retainers in a labeled bag. Add the wheel position and 1103-20-CAP. This prevents a later comparison from mixing hardware between wheels or losing the only component that proves the original layout.
Interpret wear cautiously. Sun, brake dust, cleaners and road debris can change the apparent Gloss Black and soften printed details. Wear can explain a cosmetic difference, but it cannot explain a different number, missing mounting point or incompatible rear shell. Separate age-related appearance from structural identity.
The cap fits the wheel—not the vehicle badge
A vehicle year, make and model cannot identify an aftermarket wheel center cap by itself. The same truck, SUV or car can wear factory wheels, several aftermarket wheel models or a different wheel on each trim package.
Use vehicle information as background only. The stronger evidence is the complete part number, the wheel itself and a physical comparison of the original cap with the current listing.
A matching logo is only the first check
Many wrong-cap orders begin with a convincing front view. A logo, outline or finish may look right while the back of the cap uses a different shell profile, retention layout or mounting position. The supplied record does not establish that a similar-looking cap with another part number is interchangeable with this one.
Set the original cap beside the live product photos and compare both sides in the same order. Start with the complete molded or printed number. Then check the face, edge profile and every visible point where the cap meets the wheel. If one photo hides the feature that decides the match, treat that detail as unresolved.
Also account for ordinary wear. Sun exposure, brake dust, cleaners and scratches can change how an older cap looks without changing its identity. Use finish as supporting evidence, but let the complete identifier and physical design carry more weight.
Give yourself evidence you can compare
A few clear photos and notes are more useful than trying to remember a part after it has been removed. Clean only enough dirt to reveal the identifier and attachment details; do not grind, scrape or polish away markings. Work in even light and keep the camera square to the item so perspective does not exaggerate its shape.
- Capture the identifier. Photograph the complete number in focus, including any prefix, suffix, dash or space. Write it down exactly as shown.
- Photograph both sides. Take a straight-on face image and a clear rear view. Add close-ups of retention points, holes, tabs or other features that are actually present.
- Record comparison measurements. When a measurement is needed, note where it starts and ends and which tool you used. A number without consistent reference points is easy to misread.
- Save the listing evidence. Compare your notes with the current title, description and photos at checkout. Product offers can change, so confirm quantity and included pieces on the page you are buying from.
If the original item is missing, do not replace it with a guess based on the vehicle alone. Record the wheel brand, any wheel model or casting numbers you can actually see, and clear photos of the mounting area. Send that evidence when asking for help; it gives the seller something specific to evaluate.
A no-guesswork identification checklist
-
Read every identifier. Match
1103-20-CAP,LG1607-49, the SKU where useful and every number visible on the original cap. - Compare the front. Check the outline, logo, finish and any decorative details shown in the live listing.
- Compare the back. Match the shell profile, retention points and mounting locations without assuming a similar face means the same cap.
- Measure consistently. If dimensions are not published, measure the surviving cap and ask the seller to confirm the same points on the replacement.
- Confirm the offer. Verify finish, quantity and included hardware on the current product page before checkout.
Frequently asked questions
Will 1103-20-CAP fit my vehicle?
Only if the wheel on that vehicle uses the matching center-cap design. Vehicle year, make and model alone are not enough.
Which numbers should I match?
The current record lists 1103-20-CAP, LG1607-49 and store SKU 1103-20-CAP LG1607-49 Gloss Black. Match the complete identifiers and product design instead of relying on one shortened number.
What finish does the listing identify?
The supplied product record lists Gloss Black. Compare the live image with the parts already on the wheel before ordering one replacement.
How does it attach?
The supplied listing does not confirm the attachment style. Compare the original and the product photos or ask for confirmation before ordering.
Is the listing for one piece or a set?
The product record says Sold individually.
Is mounting hardware included?
The supplied record does not establish that. Do not assume screws, bolts, retainers or tools are included unless the live product page explicitly says so.
What are the dimensions?
No exact diameter, height or depth is stated in the supplied record. Measure the original cap consistently and request confirmation rather than borrowing a measurement from another listing.
Shop the correct replacement
Do not let a convincing front photo overrule a different part number or back design. Verify first and buy once.