Pro Comp 703165502 Center Cap Guide: How to Verify the Right Part
If 703165502 is the number you are trying to replace, you are close—but you are not done.
This guide uses only the facts present in the current product record. It will tell you what the listing establishes, what it leaves open and what to compare before checkout.
Here is the blunt truth: a similar-looking part is not a confirmed match.
View the current Pro Comp 703165502 center cap listing
Verified listing details at a glance
| Product | Wheel Center Cap |
|---|---|
| Brand / manufacturer | Pro Comp |
| Part number(s) listed |
703165502, 6031CAP3, S909-18
|
| Store SKU | 703165502 6031CAP3 S909-18 |
| Finish / color | Flat Black |
| Attachment style | Screw-on / screw-retained |
| Sold as | Sold individually |
| Condition | New replacement item |
| Details stated in title | Resin Logo |
703165502 and the other listed identifiers
The current product record tells shoppers to verify 703165502, 6031CAP3, S909-18. Do not silently drop a suffix or choose only the shortest number because it is easier to type. Record every identifier shown on your original item, then compare the complete set with the live listing.
These numbers appear together in this listing. That does not prove that every item carrying only one of them is universally interchangeable. The physical design still has to match.
The listed finish is Flat Black
The product record describes the finish as Flat Black. That wording matters when you are replacing one item instead of a complete set. “Black” is not specific enough when gloss, matte, satin and mixed-finish parts can look very different beside one another.
Compare the live product image with the surviving parts in neutral daylight. Also compare the logo and any decorative details that are actually visible. Lighting, dust and years of exposure can make the same finish photograph differently.
Details called out in the product title
The title specifically calls out Resin Logo. Treat that detail as part of the identification check. A matching base number with a different face treatment may still be the wrong visual replacement.
What the listing says about attachment
The supplied product record lists the attachment style as Screw-on / screw-retained. That is the mounting claim supported by this record. It does not supply unstated clip dimensions, fastener sizes, hole spacing or installation torque.
Compare the original item and the current product photos before installation. Nothing should need to be forced into place, and a fastener that immediately binds is a reason to stop—not to reach for a power tool.
How many pieces does the listing describe?
The product record says Sold individually. Quantity language matters: a product photograph may show more than one angle or component without promising that every pictured item is included.
What the listing says about hardware
The product title states that screws are included.
Do not extend that statement beyond its words. The supplied record does not establish an unstated fastener diameter, thread pitch, length, tool size or torque specification.
What this product record does not establish
The supplied listing does not state an exact cap diameter, height or depth or the material. Those are reasons to verify—not invitations to guess.
If one of those details decides fitment, compare the original item directly with the live product photos or contact WheelCenterCaps.com before ordering.
What to do when the original part is still available
Do not try to remember the old part from across the garage. Place it on a clean surface, open the current product page and compare one feature at a time. Check 703165502, 6031CAP3, S909-18, then the edge silhouette, center rise, back shell and Screw-on / screw-retained. Finish with color and face details. A written sequence is slower by a minute and faster than a return shipment.
A mismatch is useful information. A different suffix, missing hole, altered tab layout or noticeably different rear depth is a reason to pause, even when the front looks excellent. Do not average conflicting evidence into a “probably.” Resolve the conflict or choose another listing.
Final rule: allow appearance to confirm an already-sound match, not rescue a conflict in the part number or retention design.
A closer verification pass for this listing
Name every measurement. “Eight inches” is not useful unless both people know whether it means the face, the rear skirt or a mounting circle. Label the start and end points in your photo and keep the ruler in the same plane as the feature. The supplied record should not be supplemented with an unlabeled number from a different listing.
Rank the evidence. Give the most weight to a complete physical part number and matching retention geometry. Give less weight to logo, color, wheel diameter and vehicle information. For Pro Comp 703165502, weaker clues should support the match; they should never erase a disagreement in the stronger evidence.
When the original is missing, document the opening. Take a square photo of the wheel center, a side view of the available clearance and close-ups of each attachment feature. Include a ruler only when its reference points are obvious. Send that packet with 703165502 6031CAP3 S909-18 instead of asking for fitment from the truck description alone.
Map the mounting points. Count the tabs, clips, holes or fastener locations that are actually visible, then note their spacing and orientation. Compare that map with Screw-on / screw-retained in the current photos. A front design can be reused over more than one rear architecture, so the mounting map deserves its own check.
Diameter alone is an exclusion tool. A clearly different outside width can rule a candidate out, but the same width does not prove that two caps share depth or retention. Use any confirmed diameter alongside Screw-on / screw-retained, the rear outline and 703165502, 6031CAP3, S909-18. Several separate agreements are stronger than one convenient measurement.
Inspect the shipment before installation. Compare the received label, finish, quantity and visible design with the order page while the packaging is intact. Confirm 703165502, 6031CAP3, S909-18 again. Finding a discrepancy before clips are flexed or hardware is tightened keeps the evidence clear and the return process simpler.
The cap fits the wheel—not the vehicle badge
A vehicle year, make and model cannot identify an aftermarket wheel center cap by itself. The same truck, SUV or car can wear factory wheels, several aftermarket wheel models or a different wheel on each trim package.
Use vehicle information as background only. The stronger evidence is the complete part number, the wheel itself and a physical comparison of the original cap with the current listing.
Why a front-face match can still be wrong
Many wrong-cap orders begin with a convincing front view. A logo, outline or finish may look right while the back of the cap uses a different shell profile, retention layout or mounting position. The supplied record does not establish that a similar-looking cap with another part number is interchangeable with this one.
Set the original cap beside the live product photos and compare both sides in the same order. Start with the complete molded or printed number. Then check the face, edge profile and every visible point where the cap meets the wheel. If one photo hides the feature that decides the match, treat that detail as unresolved.
Also account for ordinary wear. Sun exposure, brake dust, cleaners and scratches can change how an older cap looks without changing its identity. Use finish as supporting evidence, but let the complete identifier and physical design carry more weight.
Build a clean comparison record before you shop
A few clear photos and notes are more useful than trying to remember a part after it has been removed. Clean only enough dirt to reveal the identifier and attachment details; do not grind, scrape or polish away markings. Work in even light and keep the camera square to the item so perspective does not exaggerate its shape.
- Capture the identifier. Photograph the complete number in focus, including any prefix, suffix, dash or space. Write it down exactly as shown.
- Photograph both sides. Take a straight-on face image and a clear rear view. Add close-ups of retention points, holes, tabs or other features that are actually present.
- Record comparison measurements. When a measurement is needed, note where it starts and ends and which tool you used. A number without consistent reference points is easy to misread.
- Save the listing evidence. Compare your notes with the current title, description and photos at checkout. Product offers can change, so confirm quantity and included pieces on the page you are buying from.
If the original item is missing, do not replace it with a guess based on the vehicle alone. Record the wheel brand, any wheel model or casting numbers you can actually see, and clear photos of the mounting area. Send that evidence when asking for help; it gives the seller something specific to evaluate.
How to verify 703165502 before ordering
-
Read every identifier. Match
703165502,6031CAP3,S909-18, the SKU where useful and every number visible on the original cap. - Compare the front. Check the outline, logo, finish and any decorative details shown in the live listing.
- Compare the back. Match the shell profile, retention points and mounting locations without assuming a similar face means the same cap.
- Measure consistently. If dimensions are not published, measure the surviving cap and ask the seller to confirm the same points on the replacement.
- Confirm the offer. Verify finish, quantity and included hardware on the current product page before checkout.
Frequently asked questions
Will 703165502 fit my vehicle?
Only if the wheel on that vehicle uses the matching center-cap design. Vehicle year, make and model alone are not enough.
Which numbers should I match?
The current record lists 703165502, 6031CAP3, S909-18 and store SKU 703165502 6031CAP3 S909-18. Match the complete identifiers and product design instead of relying on one shortened number.
What finish does the listing identify?
The supplied product record lists Flat Black. Compare the live image with the parts already on the wheel before ordering one replacement.
How does it attach?
The listing identifies Screw-on / screw-retained. No unstated mounting dimensions or fastener specifications are assumed here.
Is the listing for one piece or a set?
The product record says Sold individually.
What hardware is included?
The product title states that screws are included. Confirm the current product photos and description for the exact package contents.
What are the dimensions?
No exact diameter, height or depth is stated in the supplied record. Measure the original cap consistently and request confirmation rather than borrowing a measurement from another listing.
Shop the correct replacement
The rule is simple: exact number, exact design, exact offer. Do those checks before the box ships.