Pro Comp 8327042 Center Cap Guide: Part Numbers and Ordering
A front photo can make the 8327042 cap look easy to identify. The back side and the complete part number are what finish the job.
This guide uses only the facts present in the current product record. It will tell you what the listing establishes, what it leaves open and what to compare before checkout.
Here is the blunt truth: a similar-looking part is not a confirmed match.
View the current Pro Comp 8327042 center cap listing
What the current product record confirms
| Product | Wheel Center Cap |
|---|---|
| Brand / manufacturer | Pro Comp |
| Part number(s) listed |
8327042, 8327041, S602-15
|
| Store SKU | 8327042 8327041 S602-15 |
| Finish / color | Flat Black |
| Attachment style | Push-through |
| Sold as | Sold individually |
| Condition | New replacement item |
| Details stated in title | Resin Logo |
8327042 and the other listed identifiers
The current product record tells shoppers to verify 8327042, 8327041, S602-15. Do not silently drop a suffix or choose only the shortest number because it is easier to type. Record every identifier shown on your original item, then compare the complete set with the live listing.
These numbers appear together in this listing. That does not prove that every item carrying only one of them is universally interchangeable. The physical design still has to match.
The listed finish is Flat Black
The product record describes the finish as Flat Black. That wording matters when you are replacing one item instead of a complete set. “Black” is not specific enough when gloss, matte, satin and mixed-finish parts can look very different beside one another.
Compare the live product image with the surviving parts in neutral daylight. Also compare the logo and any decorative details that are actually visible. Lighting, dust and years of exposure can make the same finish photograph differently.
Details called out in the product title
The title specifically calls out Resin Logo. Treat that detail as part of the identification check. A matching base number with a different face treatment may still be the wrong visual replacement.
What the listing says about attachment
The supplied product record lists the attachment style as Push-through. That is the mounting claim supported by this record. It does not supply unstated clip dimensions, fastener sizes, hole spacing or installation torque.
Compare the original item and the current product photos before installation. Nothing should need to be forced into place, and a fastener that immediately binds is a reason to stop—not to reach for a power tool.
How many pieces does the listing describe?
The product record says Sold individually. Quantity language matters: a product photograph may show more than one angle or component without promising that every pictured item is included.
What this product record does not establish
The supplied listing does not state an exact cap diameter, height or depth, the material or whether mounting hardware is included. Those are reasons to verify—not invitations to guess.
If one of those details decides fitment, compare the original item directly with the live product photos or contact WheelCenterCaps.com before ordering.
What to do when the old cap is missing
Save a small identification record for Pro Comp 8327042: one screenshot of the current title, one clear photo of the original marking and one rear-view photo. Add Sold individually and any wheel or lug note printed in the listing as notes. That record is useful if another cap disappears months later and it prevents a shortened marketplace title from replacing the complete part information.
Attachment language should be read literally. This record supports Push-through; it does not supply dimensions or fastener specifications that are not printed. If the photo does not show the decisive mounting detail, ask for confirmation instead of borrowing a specification from a related part.
Do not mix standards: compare measurements taken from the same points and photos taken from similar angles. Consistent reference points prevent a false mismatch.
Make the physical comparison reproducible
Account for photo scale. A tightly cropped thumbnail can make two differently sized parts occupy the same amount of screen space. Look for a stated measurement or ask for one taken from a defined point. Never infer the diameter of this wheel center cap from how large it appears against a white background.
Name every measurement. “Eight inches” is not useful unless both people know whether it means the face, the rear skirt or a mounting circle. Label the start and end points in your photo and keep the ruler in the same plane as the feature. The supplied record should not be supplemented with an unlabeled number from a different listing.
Read the wheel, not just the vehicle. Photograph any wheel-brand, model, size, offset or casting information that is genuinely visible. Those clues can help narrow a catalog, but they do not override a different 8327042 marking or back design. The wheel is the application; the vehicle badge is only context.
Use the live page at the final decision. Search snippets, saved tabs and marketplace titles can be stale or shortened. Reopen the current Pro Comp product page, confirm 8327042, Flat Black and Sold individually, and then compare the photographs again. The offer in the cart is the one that matters.
Separate the cap from the package. The page identifies the offer as Sold individually. Photos may show hardware, multiple angles or a complete wheel for context without defining everything in the box. Read the written package statement at checkout and ask what is included when the description is silent.
Check center clearance when it is relevant. If an axle end, locking hub or other component projects through the wheel center, include that clearance in the comparison. The supplied listing does not promise an open-end conversion or extra internal room unless it states one. Ask before modifying the new part.
The cap fits the wheel—not the vehicle badge
A vehicle year, make and model cannot identify an aftermarket wheel center cap by itself. The same truck, SUV or car can wear factory wheels, several aftermarket wheel models or a different wheel on each trim package.
Use vehicle information as background only. The stronger evidence is the complete part number, the wheel itself and a physical comparison of the original cap with the current listing.
The back of the cap can settle the question
Many wrong-cap orders begin with a convincing front view. A logo, outline or finish may look right while the back of the cap uses a different shell profile, retention layout or mounting position. The supplied record does not establish that a similar-looking cap with another part number is interchangeable with this one.
Set the original cap beside the live product photos and compare both sides in the same order. Start with the complete molded or printed number. Then check the face, edge profile and every visible point where the cap meets the wheel. If one photo hides the feature that decides the match, treat that detail as unresolved.
Also account for ordinary wear. Sun exposure, brake dust, cleaners and scratches can change how an older cap looks without changing its identity. Use finish as supporting evidence, but let the complete identifier and physical design carry more weight.
Document the original before making the match
A few clear photos and notes are more useful than trying to remember a part after it has been removed. Clean only enough dirt to reveal the identifier and attachment details; do not grind, scrape or polish away markings. Work in even light and keep the camera square to the item so perspective does not exaggerate its shape.
- Capture the identifier. Photograph the complete number in focus, including any prefix, suffix, dash or space. Write it down exactly as shown.
- Photograph both sides. Take a straight-on face image and a clear rear view. Add close-ups of retention points, holes, tabs or other features that are actually present.
- Record comparison measurements. When a measurement is needed, note where it starts and ends and which tool you used. A number without consistent reference points is easy to misread.
- Save the listing evidence. Compare your notes with the current title, description and photos at checkout. Product offers can change, so confirm quantity and included pieces on the page you are buying from.
If the original item is missing, do not replace it with a guess based on the vehicle alone. Record the wheel brand, any wheel model or casting numbers you can actually see, and clear photos of the mounting area. Send that evidence when asking for help; it gives the seller something specific to evaluate.
The five-check ordering routine
-
Read every identifier. Match
8327042,8327041,S602-15, the SKU where useful and every number visible on the original cap. - Compare the front. Check the outline, logo, finish and any decorative details shown in the live listing.
- Compare the back. Match the shell profile, retention points and mounting locations without assuming a similar face means the same cap.
- Measure consistently. If dimensions are not published, measure the surviving cap and ask the seller to confirm the same points on the replacement.
- Confirm the offer. Verify finish, quantity and included hardware on the current product page before checkout.
Frequently asked questions
Will 8327042 fit my vehicle?
Only if the wheel on that vehicle uses the matching center-cap design. Vehicle year, make and model alone are not enough.
Which numbers should I match?
The current record lists 8327042, 8327041, S602-15 and store SKU 8327042 8327041 S602-15. Match the complete identifiers and product design instead of relying on one shortened number.
What finish does the listing identify?
The supplied product record lists Flat Black. Compare the live image with the parts already on the wheel before ordering one replacement.
How does it attach?
The listing identifies Push-through. No unstated mounting dimensions or fastener specifications are assumed here.
Is the listing for one piece or a set?
The product record says Sold individually.
Is mounting hardware included?
The supplied record does not establish that. Do not assume screws, bolts, retainers or tools are included unless the live product page explicitly says so.
What are the dimensions?
No exact diameter, height or depth is stated in the supplied record. Measure the original cap consistently and request confirmation rather than borrowing a measurement from another listing.
Shop the correct replacement
Do not let a convincing front photo overrule a different part number or back design. Verify first and buy once.