Mayhem Wheels C108107B Center Cap Guide: How to Verify the Right Part

The useful starting point is the current listing for Mayhem Wheels C108107B. The final fitment decision still requires a physical comparison with the original item.

The current product record identifies Mayhem Wheels, lists C108107B and 8107 and describes the finish as Gloss Black. This guide keeps confirmed listing facts separate from details that still need verification.

Shopping for a C108107B center cap is not a “looks close enough” decision.

Here is the blunt truth: a similar-looking part is not a confirmed match.

View the current Mayhem Wheels C108107B product listing

What the current product record confirms

Start with the complete C108107B identifier

The current record tells shoppers to verify C108107B and 8107. Do not silently drop a suffix or choose only the shortest number because it is easier to type. Record every identifier on the original item and compare the complete set with the live listing.

Numbers appearing together on one listing are useful evidence, but they do not prove that every item carrying only one of those numbers is universally interchangeable. The physical design still has to agree.

The listed finish is Gloss Black

The current product record describes the finish as Gloss Black. Finish matters when replacing one part instead of a complete set. Compare color and sheen in neutral daylight after the part number and mounting design agree.

Lighting, brake dust, cleaners and years of exposure can change how the same finish photographs. Use appearance as supporting evidence, not as a shortcut around a different identifier.

Mounting style is not confirmed by the supplied record

The record does not support a specific clip, tab, bolt or screw claim. Compare the rear of the original item with every available product image and ask for confirmation if the retention design is hidden.

How many pieces does the listing describe?

The current record says Sold individually. A photograph can show several angles, loose hardware or a complete wheel without promising that every pictured component is included.

What this product record does not establish

Unless the live listing states them, this guide does not invent an exact diameter, height, rear depth, material, fastener specification or hardware package. Missing facts are reasons to verify—not invitations to borrow dimensions from another listing.

If one of those details decides fitment, compare the original item directly with the live product photos or contact WheelCenterCaps.com before ordering.

The fastest way to rule C108107B in or out

Make the decision in three passes. First confirm identity with C108107B and 8107. Second compare the face, edge profile and rear retention design. Third confirm the offer itself: Gloss Black, Sold individually and any package contents stated on the current page.

The store SKU C108107B Gloss Black helps identify this store offer, while the markings on the physical part are stronger evidence for the mechanical match. Keep those roles separate.

Best evidence: a complete number plus matching front, profile and rear views. Vehicle information cannot substitute for that combination.

A practical inspection notebook for C108107B

Map the mounting points. Count the tabs, clips, holes or fastener locations that are actually visible. Note their spacing and orientation; a manufacturer can reuse a front design over more than one rear architecture.

Save a rear-view photo. The back side often carries more identifying evidence than the decorative face. Photograph it square to the camera and capture every molded code, tab, rib and mounting hole.

Check one surviving part before buying four. When possible, use the best original as the reference. Confirm the complete identifier and physical design before deciding whether one replacement or a complete set best meets the cosmetic goal.

Future-proof the repair. Keep the number, rear photo and labeled measurements with the vehicle records. The next replacement will start with evidence instead of another search from scratch.

Rank the evidence. Give the most weight to a complete physical part number and matching retention geometry. Logo, color, wheel diameter and vehicle information should support that match, not overrule a disagreement.

Depth needs a reference surface. If clearance matters, state whether height was measured from the visible face, the wheel mounting surface or the deepest rear point. Different reference points can produce different numbers for the same part.

The cap fits the wheel—not the vehicle badge

A vehicle year, make and model cannot identify an aftermarket wheel center cap by itself. The same truck, SUV or car can wear factory wheels, several aftermarket wheel models or a wheel changed by a previous owner.

Use vehicle information as background only. The stronger evidence is the complete part number, the wheel itself and a direct comparison of the original cap with the current listing.

A matching face is only the first check

Many wrong-cap orders begin with a convincing front view. A logo, outline or finish can look right while the back uses a different shell profile, retention layout or mounting position. A similar face does not establish interchangeability.

Compare both sides in the same order: complete identifier, face, edge profile, rear shell and every point where the cap meets the wheel. If the photograph hides the deciding feature, treat that detail as unresolved.

Give yourself evidence you can compare

A few clear photographs and notes are more useful than trying to remember a part after it has been removed. Work in even light, keep the camera square to the item and clean only enough dirt to reveal its markings.

1. Capture the identifier. Photograph the complete number, including every prefix, suffix, dash and space.
2. Photograph both sides. Take a straight-on face image, a profile and a clear rear view.
3. Record labeled measurements. State exactly where each measurement starts and ends.
4. Save the listing evidence. Recheck quantity, finish and included pieces on the page used at checkout.

If the original item is missing, record the wheel brand, any visible wheel model or casting number, and clear photos of the mounting area. Send those details when asking for help instead of guessing from the vehicle alone.

The five-check ordering routine

1. Read every identifier. Match C108107B and 8107, the SKU where useful and every number visible on the original.
2. Compare the front. Check outline, logo, finish and decorative details.
3. Compare the back. Match the shell profile and retention points.
4. Measure consistently. Use identical reference points on the old and replacement parts.
5. Confirm the offer. Verify finish, quantity and included hardware before checkout.

Why one changed character can matter

Part-number families often reuse a recognizable face across different wheel sizes, offsets, finishes or retention designs. This record does not establish what every possible suffix means, so a changed character in C108107B and 8107 should be investigated instead of dismissed as a catalog typo.

Search formatting can also vary. Spaces and dashes may disappear in a marketplace title, while the letters and digits remain the same. Compare the physical marking, the current Mayhem Wheels listing and the rear architecture together. Formatting differences can be harmless; different characters are stronger evidence of a different part.

If a seller proposes an alternate number, ask what evidence supports the interchange. A manufacturer catalog, a matching back-side mold reference or direct measurements are useful. A shared logo, vehicle application or wheel diameter by itself is not enough.

Before the replacement goes on the wheel

Inspect the wheel opening and mounting points before installation. Remove loose dirt by hand, look for bent tabs or damaged threads and compare the new part with the old one off the wheel. The goal is to discover a mismatch before pressure or a power tool can damage anything.

Set the replacement in position without forcing it. A correctly matched part should align with the mounting design described or shown in the current listing. If the face rocks, a screw will not start by hand or the retention points land in the wrong places, stop and verify C108107B again.

After installation, confirm the cap sits evenly and does not contact a protruding hub or axle component. Recheck it after the first short drive. That simple inspection catches a loose fastener or incomplete snap before the part is lost on the road.

Frequently asked questions

Will C108107B fit my vehicle?

Only if the wheel on that vehicle uses the matching center-cap design. Vehicle year, make and model alone are not enough.

Which numbers should I match?

The current record lists C108107B and 8107 and store SKU C108107B Gloss Black. Match the complete identifiers and physical design instead of relying on one shortened number.

What finish does the listing identify?

The current record lists Gloss Black. Compare the live image with the parts already on the wheel before ordering one replacement.

How does it attach?

The current record describes attachment as Verify against photos and original item. No unstated mounting dimensions or fastener specifications are assumed here.

Is the listing for one piece or a set?

The current record says Sold individually.

Is mounting hardware included?

Do not assume screws, bolts, retainers, spacers or tools are included unless the live product page explicitly says so.

What are the exact dimensions?

If the live record does not publish them, measure the original consistently and request confirmation rather than borrowing a number from another listing.

Shop the correct replacement

• Shop the Mayhem Wheels C108107B listing
• Ask WheelCenterCaps.com for fitment help

Match the identifiers first, the physical design second and the finish third. That order is faster than processing a return.