T163H120-5-H30-S1 Center Cap Guide | KMC

Read this guide as an evidence file for KMC identifier T163H120-5-H30-S1, not as a universal application chart for visually similar wheel centers. The table work for T163H120-5-H30-S1 starts from 17 matching source rows and counts 17 different wheel SKUs among them. No row attached to T163H120-5-H30-S1 should be converted into a fit guarantee; each row simply records a WheelPros catalog association.

T163H120-5-H30-S1 evidence profile

The source vocabulary for T163H120-5-H30-S1 includes 3 wheel styles, recorded here as KM541 DIRTY HARRY, KM549 GRS, and KM550 RIOT SBL for traceability. Counting wheel-level fields for T163H120-5-H30-S1 gives 5 size values, 1 bolt-pattern value, and 2 finish values, not center-cap specifications. A representative T163H120-5-H30-S1 row is wheel SKU KM54929050500, carrying style KM549 GRS, size 20X9, pattern 5X127, and wheel finish MACHINED W/ SATIN BLACK LIP.

Representative WheelPros rows for T163H120-5-H30-S1

The T163H120-5-H30-S1 table is a limited representative sample from 17 matching source rows; it is not presented as a complete application list. Catalog rows for T163H120-5-H30-S1 carry wheel size text 20X9, 17X8.5, 17X9, 18X8.5, and 18X9, pattern text 5X127, and finish text SATIN GRAY W/ BLACK LIP, and MACHINED W/ SATIN BLACK LIP; they do not measure the replacement cap.

Inspect an original before selecting T163H120-5-H30-S1

1. After T163H120-5-H30-S1 matches, review listing photos and notes for attachment layout, finish, hardware, condition, and sold quantity.
2. Set the old code beside T163H120-5-H30-S1 and verify each dash, digit, prefix, and revision character one position at a time.
3. On the suspected T163H120-5-H30-S1 original, remove loose dirt gently until the entire reverse-side code can be read.
4. Remove the old T163H120-5-H30-S1 candidate carefully, supporting the clip area instead of levering against the wheel face.
5. Leave the identification open if T163H120-5-H30-S1 is absent or unreadable, then photograph the face, profile, reverse, and retention system.

Interpret the T163H120-5-H30-S1 reference image

For transparency, T163H120-5-H30-S1 identifies the image as associated wheel style reference rather than implying a different subject. Treat the T163H120-5-H30-S1 asset as documentation, then return to the old cap for the exact code and retention details.

Decision cautions for T163H120-5-H30-S1

• Bolt notation inside the T163H120-5-H30-S1 records is contextual wheel data, not cap-selection evidence.
• Check the live T163H120-5-H30-S1 product record for quantity, condition, price, and availability at ordering time.
• Preserve the old component through the T163H120-5-H30-S1 review so code and clip details remain available.
• Keep T163H120-5-H30-S1 unconfirmed when the only agreement is face design or color.
• Keep wheel-size values separate from the unknown dimensions of center cap T163H120-5-H30-S1.

Review the live T163H120-5-H30-S1 listing

Use the live listing for KMC T163H120-5-H30-S1 when checking present product photos, stock status, condition, price, and quantity. If another code appears on the old cap, use site search for that exact marking instead of forcing a T163H120-5-H30-S1 match. Submit unresolved T163H120-5-H30-S1 evidence through WheelCenterCaps support, including straight-on views of the cap face and back.

Questions about T163H120-5-H30-S1

Does a linked wheel style prove the cap?

No. The T163H120-5-H30-S1 style labels organize WheelPros records, while the complete identifier on the original remains the purchase evidence.

Can a bolt pattern identify this replacement?

No. For T163H120-5-H30-S1, bolt-pattern values describe associated wheel SKUs and are not a replacement-cap compatibility test.

What if the original code is unreadable?

Do not infer T163H120-5-H30-S1 from the wheel; collect readable close-ups of the cap front, profile, reverse, clips, screws, and remaining label text.