ICW Racing 316K70 Center Cap Guide: Part Numbers and Ordering
A front photo can make the 316K70 cap look easy to identify. The back side and the complete part number are what finish the job.
This guide uses only the facts present in the current product record. It will tell you what the listing establishes, what it leaves open and what to compare before checkout.
Here is the blunt truth: a similar-looking part is not a confirmed match.
View the current ICW Racing 316K70 center cap listing
The known facts in one place
| Product | Wheel Center Cap |
|---|---|
| Brand / manufacturer | ICW Racing |
| Part number(s) listed | 316K70 |
| Store SKU | 316K70 Black |
| Finish / color | Black |
| Sold as | Sold individually |
| Condition | New replacement item |
Start with the complete 316K70 identifier
The current listing uses 316K70 as the part number to verify. Match the complete identifier—including letters, suffixes and punctuation—rather than searching only a shortened fragment.
If the number on your original item is different, stop and investigate the difference before ordering. One changed letter or digit can identify another finish, depth, retention design or product family; this record does not establish which difference applies.
The listed finish is Black
The product record describes the finish as Black. That wording matters when you are replacing one item instead of a complete set. “Black” is not specific enough when gloss, matte, satin and mixed-finish parts can look very different beside one another.
Compare the live product image with the surviving parts in neutral daylight. Also compare the logo and any decorative details that are actually visible. Lighting, dust and years of exposure can make the same finish photograph differently.
Mounting style is not confirmed in the supplied listing
The product record does not identify a specific attachment style. We are not going to turn a photo into a claim about clips, tabs, bolts or screws. Compare the back of the original item with every available product image and ask for confirmation if the mounting design is not visible.
How many pieces does the listing describe?
The product record says Sold individually. Quantity language matters: a product photograph may show more than one angle or component without promising that every pictured item is included.
What this product record does not establish
The supplied listing does not state an exact cap diameter, height or depth, the material, a confirmed attachment style or whether mounting hardware is included. Those are reasons to verify—not invitations to guess.
If one of those details decides fitment, compare the original item directly with the live product photos or contact WheelCenterCaps.com before ordering.
The fastest way to rule 316K70 in or out
Make the decision in three passes. First confirm the identity using 316K70. Second confirm the physical design using the profile and the back-side retention design shown in the photos. Third confirm the offer itself: Black, Sold individually and any package contents stated on the live page. Passing only one or two of those stages is not a complete match.
The SKU 316K70 Black is useful for finding this store offer, while the part markings on the original component are stronger evidence for the physical match. Keep those roles separate. A store SKU can distinguish two listings without necessarily appearing on the cap itself.
Best evidence: a complete number plus a matching front, profile and rear view. Vehicle information cannot substitute for that combination.
Six product-specific checks worth recording
Check center clearance when it is relevant. If an axle end, locking hub or other component projects through the wheel center, include that clearance in the comparison. The supplied listing does not promise an open-end conversion or extra internal room unless it states one. Ask before modifying the new part.
Clean gently for identification. Use a soft cloth to expose molded or printed marks on the old wheel center cap. Aggressive scraping can remove a sticker, flatten shallow lettering or alter the edge you need to compare. The objective is readable evidence, not a showroom finish. Photograph the markings as soon as they become legible.
Interpret wear cautiously. Sun, brake dust, cleaners and road debris can change the apparent Black and soften printed details. Wear can explain a cosmetic difference, but it cannot explain a different number, missing mounting point or incompatible rear shell. Separate age-related appearance from structural identity.
Save the successful match. Once the part has been verified, keep a rear photo, the complete 316K70 identifier and the product link with your wheel records. That small archive turns the next loss into a direct lookup and preserves details that may be hidden after installation.
Rank the evidence. Give the most weight to a complete physical part number and matching retention geometry. Give less weight to logo, color, wheel diameter and vehicle information. For ICW Racing 316K70, weaker clues should support the match; they should never erase a disagreement in the stronger evidence.
Compare sheen, not only color. The record uses Black. Look at how light rolls across the surface and how the logo or accents contrast with it. Dust and aging can dull an original, so finish is best used after the identifier and mechanical design agree—not as a shortcut around them.
The cap fits the wheel—not the vehicle badge
A vehicle year, make and model cannot identify an aftermarket wheel center cap by itself. The same truck, SUV or car can wear factory wheels, several aftermarket wheel models or a different wheel on each trim package.
Use vehicle information as background only. The stronger evidence is the complete part number, the wheel itself and a physical comparison of the original cap with the current listing.
Why a front-face match can still be wrong
Many wrong-cap orders begin with a convincing front view. A logo, outline or finish may look right while the back of the cap uses a different shell profile, retention layout or mounting position. The supplied record does not establish that a similar-looking cap with another part number is interchangeable with this one.
Set the original cap beside the live product photos and compare both sides in the same order. Start with the complete molded or printed number. Then check the face, edge profile and every visible point where the cap meets the wheel. If one photo hides the feature that decides the match, treat that detail as unresolved.
Also account for ordinary wear. Sun exposure, brake dust, cleaners and scratches can change how an older cap looks without changing its identity. Use finish as supporting evidence, but let the complete identifier and physical design carry more weight.
Build a clean comparison record before you shop
A few clear photos and notes are more useful than trying to remember a part after it has been removed. Clean only enough dirt to reveal the identifier and attachment details; do not grind, scrape or polish away markings. Work in even light and keep the camera square to the item so perspective does not exaggerate its shape.
- Capture the identifier. Photograph the complete number in focus, including any prefix, suffix, dash or space. Write it down exactly as shown.
- Photograph both sides. Take a straight-on face image and a clear rear view. Add close-ups of retention points, holes, tabs or other features that are actually present.
- Record comparison measurements. When a measurement is needed, note where it starts and ends and which tool you used. A number without consistent reference points is easy to misread.
- Save the listing evidence. Compare your notes with the current title, description and photos at checkout. Product offers can change, so confirm quantity and included pieces on the page you are buying from.
If the original item is missing, do not replace it with a guess based on the vehicle alone. Record the wheel brand, any wheel model or casting numbers you can actually see, and clear photos of the mounting area. Send that evidence when asking for help; it gives the seller something specific to evaluate.
A no-guesswork identification checklist
-
Read every identifier. Match
316K70, the SKU where useful and every number visible on the original cap. - Compare the front. Check the outline, logo, finish and any decorative details shown in the live listing.
- Compare the back. Match the shell profile, retention points and mounting locations without assuming a similar face means the same cap.
- Measure consistently. If dimensions are not published, measure the surviving cap and ask the seller to confirm the same points on the replacement.
- Confirm the offer. Verify finish, quantity and included hardware on the current product page before checkout.
Frequently asked questions
Will 316K70 fit my vehicle?
Only if the wheel on that vehicle uses the matching center-cap design. Vehicle year, make and model alone are not enough.
Which numbers should I match?
The current record lists 316K70 and store SKU 316K70 Black. Match the complete identifiers and product design instead of relying on one shortened number.
What finish does the listing identify?
The supplied product record lists Black. Compare the live image with the parts already on the wheel before ordering one replacement.
How does it attach?
The supplied listing does not confirm the attachment style. Compare the original and the product photos or ask for confirmation before ordering.
Is the listing for one piece or a set?
The product record says Sold individually.
Is mounting hardware included?
The supplied record does not establish that. Do not assume screws, bolts, retainers or tools are included unless the live product page explicitly says so.
What are the dimensions?
No exact diameter, height or depth is stated in the supplied record. Measure the original cap consistently and request confirmation rather than borrowing a measurement from another listing.
Shop the correct replacement
Match the identifiers first, the physical design second and the finish third. That order is faster than processing a return.