American Racing 1327000S Center Cap Guide: Part Numbers and Ordering
A front photo can make the 1327000S cap look easy to identify. The back side and the complete part number are what finish the job.
The current WheelCenterCaps.com record identifies this as new replacement item wheel center cap from American Racing. The listing is the source for those details; anything it does not state stays unclaimed.
Here is the blunt truth: a similar-looking part is not a confirmed match.
View the current American Racing 1327000S center cap listing
The known facts in one place
| Product | Wheel Center Cap |
|---|---|
| Brand / manufacturer | American Racing |
| Part number(s) listed |
1327000S, 1327000S-4PACK
|
| Store SKU | 1327000S-4Pack |
| Sold as | 4-piece listing |
| Condition | New replacement item |
1327000S and the other listed identifiers
The current product record tells shoppers to verify 1327000S, 1327000S-4PACK. Do not silently drop a suffix or choose only the shortest number because it is easier to type. Record every identifier shown on your original item, then compare the complete set with the live listing.
These numbers appear together in this listing. That does not prove that every item carrying only one of them is universally interchangeable. The physical design still has to match.
Mounting style is not confirmed in the supplied listing
The product record does not identify a specific attachment style. We are not going to turn a photo into a claim about clips, tabs, bolts or screws. Compare the back of the original item with every available product image and ask for confirmation if the mounting design is not visible.
How many pieces does the listing describe?
The product record says 4-piece listing. Quantity language matters: a product photograph may show more than one angle or component without promising that every pictured item is included.
What this product record does not establish
The supplied listing does not state an exact cap diameter, height or depth, the material, a confirmed attachment style or whether mounting hardware is included. Those are reasons to verify—not invitations to guess.
If one of those details decides fitment, compare the original item directly with the live product photos or contact WheelCenterCaps.com before ordering.
Separate identifying evidence from background clues
Before checkout, give the match five focused minutes. Read the whole code aloud, compare the front, compare the back, check the photographed finish and confirm 4-piece listing. If the attachment evidence is incomplete, stop there. Five minutes of verification costs less than return postage and protects the wheel from a forced installation.
Package quantity is part of the product, not a checkout detail to assume later. The record points to 4-piece listing. Verify the live offer again before payment, especially when product photographs show multiple angles or when single and multipack listings use similar titles.
Installation check: the part should align naturally before force is applied. Binding, rocking or misaligned mounting points mean the comparison needs to be revisited.
Details to capture before this part goes in the cart
Save the successful match. Once the part has been verified, keep a rear photo, the complete 1327000S identifier and the product link with your wheel records. That small archive turns the next loss into a direct lookup and preserves details that may be hidden after installation.
Control the camera angle. A straight-on face photo helps compare logos and outline; a straight-on rear photo shows the retention layout; a low side view reveals the profile. Take those three views of the original before opening the American Racing listing. Matching angles make genuine differences easier to see and prevent perspective from turning a shallow part into a tall one.
When the original is missing, document the opening. Take a square photo of the wheel center, a side view of the available clearance and close-ups of each attachment feature. Include a ruler only when its reference points are obvious. Send that packet with 1327000S-4Pack instead of asking for fitment from the truck description alone.
Preserve the suffix. The end of a part number is easy to dismiss as a color code or revision, yet this record does not authorize dropping it. Keep every letter and digit attached to 1327000S while comparing offers. If another page shows the same base with a different ending, treat it as a separate candidate until the photos and listing facts prove otherwise.
Account for photo scale. A tightly cropped thumbnail can make two differently sized parts occupy the same amount of screen space. Look for a stated measurement or ask for one taken from a defined point. Never infer the diameter of this wheel center cap from how large it appears against a white background.
Diameter alone is an exclusion tool. A clearly different outside width can rule a candidate out, but the same width does not prove that two caps share depth or retention. Use any confirmed diameter alongside the photographed mounting design, the rear outline and 1327000S, 1327000S-4PACK. Several separate agreements are stronger than one convenient measurement.
The cap fits the wheel—not the vehicle badge
A vehicle year, make and model cannot identify an aftermarket wheel center cap by itself. The same truck, SUV or car can wear factory wheels, several aftermarket wheel models or a different wheel on each trim package.
Use vehicle information as background only. The stronger evidence is the complete part number, the wheel itself and a physical comparison of the original cap with the current listing.
Why a front-face match can still be wrong
Many wrong-cap orders begin with a convincing front view. A logo, outline or finish may look right while the back of the cap uses a different shell profile, retention layout or mounting position. The supplied record does not establish that a similar-looking cap with another part number is interchangeable with this one.
Set the original cap beside the live product photos and compare both sides in the same order. Start with the complete molded or printed number. Then check the face, edge profile and every visible point where the cap meets the wheel. If one photo hides the feature that decides the match, treat that detail as unresolved.
Also account for ordinary wear. Sun exposure, brake dust, cleaners and scratches can change how an older cap looks without changing its identity. Use finish as supporting evidence, but let the complete identifier and physical design carry more weight.
Give yourself evidence you can compare
A few clear photos and notes are more useful than trying to remember a part after it has been removed. Clean only enough dirt to reveal the identifier and attachment details; do not grind, scrape or polish away markings. Work in even light and keep the camera square to the item so perspective does not exaggerate its shape.
- Capture the identifier. Photograph the complete number in focus, including any prefix, suffix, dash or space. Write it down exactly as shown.
- Photograph both sides. Take a straight-on face image and a clear rear view. Add close-ups of retention points, holes, tabs or other features that are actually present.
- Record comparison measurements. When a measurement is needed, note where it starts and ends and which tool you used. A number without consistent reference points is easy to misread.
- Save the listing evidence. Compare your notes with the current title, description and photos at checkout. Product offers can change, so confirm quantity and included pieces on the page you are buying from.
If the original item is missing, do not replace it with a guess based on the vehicle alone. Record the wheel brand, any wheel model or casting numbers you can actually see, and clear photos of the mounting area. Send that evidence when asking for help; it gives the seller something specific to evaluate.
A no-guesswork identification checklist
-
Read every identifier. Match
1327000S,1327000S-4PACK, the SKU where useful and every number visible on the original cap. - Compare the front. Check the outline, logo, finish and any decorative details shown in the live listing.
- Compare the back. Match the shell profile, retention points and mounting locations without assuming a similar face means the same cap.
- Measure consistently. If dimensions are not published, measure the surviving cap and ask the seller to confirm the same points on the replacement.
- Confirm the offer. Verify finish, quantity and included hardware on the current product page before checkout.
Frequently asked questions
Will 1327000S fit my vehicle?
Only if the wheel on that vehicle uses the matching center-cap design. Vehicle year, make and model alone are not enough.
Which numbers should I match?
The current record lists 1327000S, 1327000S-4PACK and store SKU 1327000S-4Pack. Match the complete identifiers and product design instead of relying on one shortened number.
How does it attach?
The supplied listing does not confirm the attachment style. Compare the original and the product photos or ask for confirmation before ordering.
Is the listing for one piece or a set?
The product record says 4-piece listing.
Is mounting hardware included?
The supplied record does not establish that. Do not assume screws, bolts, retainers or tools are included unless the live product page explicitly says so.
What are the dimensions?
No exact diameter, height or depth is stated in the supplied record. Measure the original cap consistently and request confirmation rather than borrowing a measurement from another listing.
Shop the correct replacement
Match the identifiers first, the physical design second and the finish third. That order is faster than processing a return.