Ultra Wheel 89-9855 Center Cap Identification Guide
Shopping for a 89-9855 center cap is not a “looks close enough” decision.
Here is the useful starting point: the listing names Ultra Wheel, identifies 89-9855 and lists a Chrome finish. The remaining fitment work is a physical comparison, not a guess.
Here is the blunt truth: a similar-looking part is not a confirmed match.
View the current Ultra Wheel 89-9855 center cap listing
What the current product record confirms
| Product | Wheel Center Cap |
|---|---|
| Brand / manufacturer | Ultra Wheel |
| Part number(s) listed | 89-9855 |
| Store SKU | 89-9855 Chrome Cap |
| Finish / color | Chrome |
| Attachment style | Bolt-on / bolt-retained |
| Lug / wheel note | 5 lug |
| Sold as | 1-piece listing |
| Condition | New replacement item |
Start with the complete 89-9855 identifier
The current listing uses 89-9855 as the part number to verify. Match the complete identifier—including letters, suffixes and punctuation—rather than searching only a shortened fragment.
If the number on your original item is different, stop and investigate the difference before ordering. One changed letter or digit can identify another finish, depth, retention design or product family; this record does not establish which difference applies.
The listed finish is Chrome
The product record describes the finish as Chrome. That wording matters when you are replacing one item instead of a complete set. “Black” is not specific enough when gloss, matte, satin and mixed-finish parts can look very different beside one another.
Compare the live product image with the surviving parts in neutral daylight. Also compare the logo and any decorative details that are actually visible. Lighting, dust and years of exposure can make the same finish photograph differently.
What the listing says about attachment
The supplied product record lists the attachment style as Bolt-on / bolt-retained. That is the mounting claim supported by this record. It does not supply unstated clip dimensions, fastener sizes, hole spacing or installation torque.
Compare the original item and the current product photos before installation. Nothing should need to be forced into place, and a fastener that immediately binds is a reason to stop—not to reach for a power tool.
What the 5 lug note does—and does not—tell you
The current listing includes a 5 lug wheel note. That can narrow the search, but it does not make this part universal across every wheel with the same lug count. The center cap or accessory must still match the exact wheel application and its own retention design.
How many pieces does the listing describe?
The product record says 1-piece listing. Quantity language matters: a product photograph may show more than one angle or component without promising that every pictured item is included.
What the listing says about hardware
The product title states that bolts are included.
Do not extend that statement beyond its words. The supplied record does not establish an unstated fastener diameter, thread pitch, length, tool size or torque specification.
What this product record does not establish
The supplied listing does not state an exact cap diameter, height or depth or the material. Those are reasons to verify—not invitations to guess.
If one of those details decides fitment, compare the original item directly with the live product photos or contact WheelCenterCaps.com before ordering.
The fastest way to rule 89-9855 in or out
Make the decision in three passes. First confirm the identity using 89-9855. Second confirm the physical design using the profile and Bolt-on / bolt-retained. Third confirm the offer itself: Chrome, 1-piece listing and any package contents stated on the live page. Passing only one or two of those stages is not a complete match.
The SKU 89-9855 Chrome Cap is useful for finding this store offer, while the part markings on the original component are stronger evidence for the physical match. Keep those roles separate. A store SKU can distinguish two listings without necessarily appearing on the cap itself.
Best evidence: a complete number plus a matching front, profile and rear view. Vehicle information cannot substitute for that combination.
Details to capture before this part goes in the cart
Name every measurement. “Eight inches” is not useful unless both people know whether it means the face, the rear skirt or a mounting circle. Label the start and end points in your photo and keep the ruler in the same plane as the feature. The supplied record should not be supplemented with an unlabeled number from a different listing.
Do a dry alignment first. Before pressing, snapping or tightening anything, verify that the part sits square and every retention feature approaches its matching location naturally. If Bolt-on / bolt-retained does not line up, stop. Extra force cannot convert a near match into the correct component.
Inspect the shipment before installation. Compare the received label, finish, quantity and visible design with the order page while the packaging is intact. Confirm 89-9855 again. Finding a discrepancy before clips are flexed or hardware is tightened keeps the evidence clear and the return process simpler.
Compare sheen, not only color. The record uses Chrome. Look at how light rolls across the surface and how the logo or accents contrast with it. Dust and aging can dull an original, so finish is best used after the identifier and mechanical design agree—not as a shortcut around them.
Decide whether one replacement will look intentional. A new Chrome part may sit beside three weathered originals. That cosmetic difference does not establish bad fitment, but it can affect whether a single or full-set purchase meets your goal. Confirm 1-piece listing before assuming the listing solves either option.
Map the mounting points. Count the tabs, clips, holes or fastener locations that are actually visible, then note their spacing and orientation. Compare that map with Bolt-on / bolt-retained in the current photos. A front design can be reused over more than one rear architecture, so the mounting map deserves its own check.
The cap fits the wheel—not the vehicle badge
A vehicle year, make and model cannot identify an aftermarket wheel center cap by itself. The same truck, SUV or car can wear factory wheels, several aftermarket wheel models or a different wheel on each trim package.
Use vehicle information as background only. The stronger evidence is the complete part number, the wheel itself and a physical comparison of the original cap with the current listing.
A matching logo is only the first check
Many wrong-cap orders begin with a convincing front view. A logo, outline or finish may look right while the back of the cap uses a different shell profile, retention layout or mounting position. The supplied record does not establish that a similar-looking cap with another part number is interchangeable with this one.
Set the original cap beside the live product photos and compare both sides in the same order. Start with the complete molded or printed number. Then check the face, edge profile and every visible point where the cap meets the wheel. If one photo hides the feature that decides the match, treat that detail as unresolved.
Also account for ordinary wear. Sun exposure, brake dust, cleaners and scratches can change how an older cap looks without changing its identity. Use finish as supporting evidence, but let the complete identifier and physical design carry more weight.
Give yourself evidence you can compare
A few clear photos and notes are more useful than trying to remember a part after it has been removed. Clean only enough dirt to reveal the identifier and attachment details; do not grind, scrape or polish away markings. Work in even light and keep the camera square to the item so perspective does not exaggerate its shape.
- Capture the identifier. Photograph the complete number in focus, including any prefix, suffix, dash or space. Write it down exactly as shown.
- Photograph both sides. Take a straight-on face image and a clear rear view. Add close-ups of retention points, holes, tabs or other features that are actually present.
- Record comparison measurements. When a measurement is needed, note where it starts and ends and which tool you used. A number without consistent reference points is easy to misread.
- Save the listing evidence. Compare your notes with the current title, description and photos at checkout. Product offers can change, so confirm quantity and included pieces on the page you are buying from.
If the original item is missing, do not replace it with a guess based on the vehicle alone. Record the wheel brand, any wheel model or casting numbers you can actually see, and clear photos of the mounting area. Send that evidence when asking for help; it gives the seller something specific to evaluate.
The five-check ordering routine
-
Read every identifier. Match
89-9855, the SKU where useful and every number visible on the original cap. - Compare the front. Check the outline, logo, finish and any decorative details shown in the live listing.
- Compare the back. Match the shell profile, retention points and mounting locations without assuming a similar face means the same cap.
- Measure consistently. If dimensions are not published, measure the surviving cap and ask the seller to confirm the same points on the replacement.
- Confirm the offer. Verify finish, quantity and included hardware on the current product page before checkout.
Frequently asked questions
Will 89-9855 fit my vehicle?
Only if the wheel on that vehicle uses the matching center-cap design. Vehicle year, make and model alone are not enough.
Which numbers should I match?
The current record lists 89-9855 and store SKU 89-9855 Chrome Cap. Match the complete identifiers and product design instead of relying on one shortened number.
What finish does the listing identify?
The supplied product record lists Chrome. Compare the live image with the parts already on the wheel before ordering one replacement.
How does it attach?
The listing identifies Bolt-on / bolt-retained. No unstated mounting dimensions or fastener specifications are assumed here.
Is the listing for one piece or a set?
The product record says 1-piece listing.
What hardware is included?
The product title states that bolts are included. Confirm the current product photos and description for the exact package contents.
What are the dimensions?
No exact diameter, height or depth is stated in the supplied record. Measure the original cap consistently and request confirmation rather than borrowing a measurement from another listing.
Shop the correct replacement
Do not let a convincing front photo overrule a different part number or back design. Verify first and buy once.