1007-22-05MBS Center Cap Guide | Niche

Use 1007-22-05MBS to anchor this Niche center-cap inquiry; the WheelPros associations below provide context only after that code agrees. The table work for 1007-22-05MBS starts from 46 matching source rows and counts 46 different wheel SKUs among them. Reading 1007-22-05MBS responsibly means separating official wheel context from any unsupported conclusion about a particular vehicle.

1007-22-05MBS evidence profile

Across the 1007-22-05MBS records, 1 style entry value appear: NC279 PRODIGY 5, preserving the terminology used in the source. Associated rows for 1007-22-05MBS list 11 distinct wheel sizes, 7 bolt patterns, and 1 wheel finish; those fields must stay separate from cap identification. The first displayed WheelPros reference for 1007-22-05MBS, SKU NC279MX18954940, records NC279 PRODIGY 5, 18X9.5, 5X120, and MATTE BLACK.

Representative WheelPros rows for 1007-22-05MBS

These 1007-22-05MBS examples were selected from 46 matching WheelPros rows, so their purpose is auditability rather than universal fitment. When auditing 1007-22-05MBS, keep the fields separated: 18X8.5, 18X9.5, 19X8.5, 19X9.5, 20X10.5, 20X11, 20X9, plus 4 additional values records wheel size, 5X114.3, 5X120, 5X100, 5X112, 5X115, 5X130, and 5X127 records bolt pattern, and MATTE BLACK records wheel finish.

Inspect an original before selecting 1007-22-05MBS

1. If 1007-22-05MBS cannot be confirmed, pause the order and collect clear front, side, and straight-on backside photographs.
2. Access the reverse of the suspected 1007-22-05MBS cap without bending retention tabs or using the visible wheel surface as a pry point.
3. On the suspected 1007-22-05MBS original, remove loose dirt gently until the entire reverse-side code can be read.
4. Set the old code beside 1007-22-05MBS and verify each dash, digit, prefix, and revision character one position at a time.
5. Only following an exact 1007-22-05MBS code match should the product-page images, retention details, condition, and quantity be compared.

Interpret the 1007-22-05MBS reference image

The 1007-22-05MBS media is classified as associated wheel style reference, preventing a full-wheel reference from being mistaken for an isolated cap photo. Do not use the 1007-22-05MBS image to bridge a code mismatch; finishes, center emblems, and proportions can look alike across different parts.

Decision cautions for 1007-22-05MBS

• Do not choose 1007-22-05MBS merely because the emblem and visible finish appear similar.
• Retain the old cap while evaluating 1007-22-05MBS, because it is the reference for markings and attachment geometry.
• Check the live 1007-22-05MBS product record for quantity, condition, price, and availability at ordering time.
• Do not let any 1007-22-05MBS bolt-pattern association substitute for exact identifier matching.
• Do not translate the 1007-22-05MBS wheel-size field into a center-cap diameter.

Review the live 1007-22-05MBS listing

Use the live listing for Niche 1007-22-05MBS when checking present product photos, stock status, condition, price, and quantity. A code that differs from 1007-22-05MBS should be entered into the center-cap search as written on the original. Unclear evidence for 1007-22-05MBS can be sent through the contact page with readable close-ups of every code and clip.

Questions about 1007-22-05MBS

Does a linked wheel style prove the cap?

No. The 1007-22-05MBS style labels organize WheelPros records, while the complete identifier on the original remains the purchase evidence.

Can a bolt pattern identify this replacement?

No. For 1007-22-05MBS, bolt-pattern values describe associated wheel SKUs and are not a replacement-cap compatibility test.

What if the original code is unreadable?

Treat 1007-22-05MBS as unresolved until clear photographs or another source reveals the full original identifier without guesswork.