Mayhem Wheels C108040B01 Center Cap Identification Guide
Shopping for a C108040B01 center cap is not a “looks close enough” decision.
This guide uses only the facts present in the current product record. It will tell you what the listing establishes, what it leaves open and what to compare before checkout.
Here is the blunt truth: a similar-looking part is not a confirmed match.
View the current Mayhem Wheels C108040B01 center cap listing
What the current product record confirms
| Product | Wheel Center Cap |
|---|---|
| Brand / manufacturer | Mayhem Wheels |
| Part number(s) listed |
C108040B01, 81222090F-1, C108010B, C806801-1CAP
|
| Store SKU | C108040B01 |
| Finish / color | Gloss Black |
| Sold as | Sold individually |
| Condition | New replacement item |
C108040B01 and the other listed identifiers
The current product record tells shoppers to verify C108040B01, 81222090F-1, C108010B, C806801-1CAP. Do not silently drop a suffix or choose only the shortest number because it is easier to type. Record every identifier shown on your original item, then compare the complete set with the live listing.
These numbers appear together in this listing. That does not prove that every item carrying only one of them is universally interchangeable. The physical design still has to match.
The listed finish is Gloss Black
The product record describes the finish as Gloss Black. That wording matters when you are replacing one item instead of a complete set. “Black” is not specific enough when gloss, matte, satin and mixed-finish parts can look very different beside one another.
Compare the live product image with the surviving parts in neutral daylight. Also compare the logo and any decorative details that are actually visible. Lighting, dust and years of exposure can make the same finish photograph differently.
Mounting style is not confirmed in the supplied listing
The product record does not identify a specific attachment style. We are not going to turn a photo into a claim about clips, tabs, bolts or screws. Compare the back of the original item with every available product image and ask for confirmation if the mounting design is not visible.
How many pieces does the listing describe?
The product record says Sold individually. Quantity language matters: a product photograph may show more than one angle or component without promising that every pictured item is included.
What this product record does not establish
The supplied listing does not state an exact cap diameter, height or depth, the material, a confirmed attachment style or whether mounting hardware is included. Those are reasons to verify—not invitations to guess.
If one of those details decides fitment, compare the original item directly with the live product photos or contact WheelCenterCaps.com before ordering.
A five-minute check that can prevent the wrong order
Treat C108040B01, 81222090F-1, C108010B, C806801-1CAP and the physical back design as identifying evidence. Treat vehicle information, wheel diameter, any wheel or lug note printed in the listing and a similar logo as supporting clues. Supporting clues can narrow the search, but they should not overrule a different code or retention layout. That distinction matters most when several products share the same brand styling.
Finish can mislead when it is judged from one phone photo. The listing identifies Gloss Black; compare it in neutral light and pay attention to sheen as well as color. Brake dust, fading and wheel cleaner can make an older matching part look duller than a new replacement.
Future-proof the repair: keep the number and rear photo with your maintenance records so the next replacement starts with evidence instead of another search from scratch.
Make the physical comparison reproducible
Interpret wear cautiously. Sun, brake dust, cleaners and road debris can change the apparent Gloss Black and soften printed details. Wear can explain a cosmetic difference, but it cannot explain a different number, missing mounting point or incompatible rear shell. Separate age-related appearance from structural identity.
Map the mounting points. Count the tabs, clips, holes or fastener locations that are actually visible, then note their spacing and orientation. Compare that map with the photographed mounting design in the current photos. A front design can be reused over more than one rear architecture, so the mounting map deserves its own check.
Make support easy to answer. Send one message containing C108040B01, 81222090F-1, C108010B, C806801-1CAP, C108040B01, a full wheel photo, front and rear images of the original, and the one measurement that decides your concern. A compact evidence set produces a more useful answer than several messages that reveal the part details one at a time.
Preserve the suffix. The end of a part number is easy to dismiss as a color code or revision, yet this record does not authorize dropping it. Keep every letter and digit attached to C108040B01 while comparing offers. If another page shows the same base with a different ending, treat it as a separate candidate until the photos and listing facts prove otherwise.
Do a dry alignment first. Before pressing, snapping or tightening anything, verify that the part sits square and every retention feature approaches its matching location naturally. If the photographed mounting design does not line up, stop. Extra force cannot convert a near match into the correct component.
Separate the cap from the package. The page identifies the offer as Sold individually. Photos may show hardware, multiple angles or a complete wheel for context without defining everything in the box. Read the written package statement at checkout and ask what is included when the description is silent.
The cap fits the wheel—not the vehicle badge
A vehicle year, make and model cannot identify an aftermarket wheel center cap by itself. The same truck, SUV or car can wear factory wheels, several aftermarket wheel models or a different wheel on each trim package.
Use vehicle information as background only. The stronger evidence is the complete part number, the wheel itself and a physical comparison of the original cap with the current listing.
A matching logo is only the first check
Many wrong-cap orders begin with a convincing front view. A logo, outline or finish may look right while the back of the cap uses a different shell profile, retention layout or mounting position. The supplied record does not establish that a similar-looking cap with another part number is interchangeable with this one.
Set the original cap beside the live product photos and compare both sides in the same order. Start with the complete molded or printed number. Then check the face, edge profile and every visible point where the cap meets the wheel. If one photo hides the feature that decides the match, treat that detail as unresolved.
Also account for ordinary wear. Sun exposure, brake dust, cleaners and scratches can change how an older cap looks without changing its identity. Use finish as supporting evidence, but let the complete identifier and physical design carry more weight.
Give yourself evidence you can compare
A few clear photos and notes are more useful than trying to remember a part after it has been removed. Clean only enough dirt to reveal the identifier and attachment details; do not grind, scrape or polish away markings. Work in even light and keep the camera square to the item so perspective does not exaggerate its shape.
- Capture the identifier. Photograph the complete number in focus, including any prefix, suffix, dash or space. Write it down exactly as shown.
- Photograph both sides. Take a straight-on face image and a clear rear view. Add close-ups of retention points, holes, tabs or other features that are actually present.
- Record comparison measurements. When a measurement is needed, note where it starts and ends and which tool you used. A number without consistent reference points is easy to misread.
- Save the listing evidence. Compare your notes with the current title, description and photos at checkout. Product offers can change, so confirm quantity and included pieces on the page you are buying from.
If the original item is missing, do not replace it with a guess based on the vehicle alone. Record the wheel brand, any wheel model or casting numbers you can actually see, and clear photos of the mounting area. Send that evidence when asking for help; it gives the seller something specific to evaluate.
The five-check ordering routine
-
Read every identifier. Match
C108040B01,81222090F-1,C108010B,C806801-1CAP, the SKU where useful and every number visible on the original cap. - Compare the front. Check the outline, logo, finish and any decorative details shown in the live listing.
- Compare the back. Match the shell profile, retention points and mounting locations without assuming a similar face means the same cap.
- Measure consistently. If dimensions are not published, measure the surviving cap and ask the seller to confirm the same points on the replacement.
- Confirm the offer. Verify finish, quantity and included hardware on the current product page before checkout.
Frequently asked questions
Will C108040B01 fit my vehicle?
Only if the wheel on that vehicle uses the matching center-cap design. Vehicle year, make and model alone are not enough.
Which numbers should I match?
The current record lists C108040B01, 81222090F-1, C108010B, C806801-1CAP and store SKU C108040B01. Match the complete identifiers and product design instead of relying on one shortened number.
What finish does the listing identify?
The supplied product record lists Gloss Black. Compare the live image with the parts already on the wheel before ordering one replacement.
How does it attach?
The supplied listing does not confirm the attachment style. Compare the original and the product photos or ask for confirmation before ordering.
Is the listing for one piece or a set?
The product record says Sold individually.
Is mounting hardware included?
The supplied record does not establish that. Do not assume screws, bolts, retainers or tools are included unless the live product page explicitly says so.
What are the dimensions?
No exact diameter, height or depth is stated in the supplied record. Measure the original cap consistently and request confirmation rather than borrowing a measurement from another listing.
Shop the correct replacement
Match the identifiers first, the physical design second and the finish third. That order is faster than processing a return.