T163H170-8-H65-P1 Center Cap Guide | KMC

Associated KMC wheel style reference for center cap part number T163H170-8-H65-P1

For the KMC cap listed here, T163H170-8-H65-P1 is the controlling lookup key, so preserve every character when transcribing the original marking. The T163H170-8-H65-P1 dataset is defined by 32 matching WheelPros rows, with 32 distinct wheel SKUs inside that result. Use the T163H170-8-H65-P1 rows to audit the source connection, while leaving vehicle and wheel-spec assumptions out of the identification decision.

Associated KMC wheel style reference for center cap part number T163H170-8-H65-P1
Official WheelPros full-wheel reference for KM235 GRENADE CRAWL BEADLOCK, associated with T163H170-8-H65-P1 through wheel SKU KM23521080548N; this image provides wheel-style context and does not portray the center cap as an isolated product.

T163H170-8-H65-P1 evidence profile

Brand on product record KMC
Exact center-cap identifier T163H170-8-H65-P1
Existing product-record description KMC CAP BOLT-ON (PO/GB/CH) - 8X6.5/180
Matching WheelPros source rows 32
Distinct associated wheel SKUs 32
Wheel style values KM234 GRENADE DESERT BEADLOCK, KM235 GRENADE CRAWL BEADLOCK, KM451 MESA FORGED MONOBLOCK, KM452 IMPACT FORGED MONOBLOCK, and KM549 GRS
Source brand values KMC
Image classification associated wheel style reference

For T163H170-8-H65-P1, the catalog names 5 style values: KM234 GRENADE DESERT BEADLOCK, KM235 GRENADE CRAWL BEADLOCK, KM451 MESA FORGED MONOBLOCK, KM452 IMPACT FORGED MONOBLOCK, and KM549 GRS; spelling is retained so the source trail remains reviewable. For audit purposes, T163H170-8-H65-P1 connects to 6 size values, 2 bolt-pattern values, and 3 finish labels on complete-wheel records. The T163H170-8-H65-P1 evidence includes KM23579080538N, whose catalog row lists KM235 GRENADE CRAWL BEADLOCK / 17X9 / 8X165.1 / MACHINED.

Representative WheelPros rows for T163H170-8-H65-P1

Wheel SKU Style Wheel size Bolt-pattern context Wheel finish
KM23579080538N KM235 GRENADE CRAWL BEADLOCK 17X9 8X165.1 MACHINED
KM23589080510 KM235 GRENADE CRAWL BEADLOCK 18X9 8X165.1 MACHINED
KM23589080524N KM235 GRENADE CRAWL BEADLOCK 18X9 8X165.1 MACHINED
KM451DX18908000 KM451 MESA FORGED MONOBLOCK 18X9 8X165.1 RAW MACHINED
KM451DX18908012N KM451 MESA FORGED MONOBLOCK 18X9 8X165.1 RAW MACHINED
KM451DX18908018 KM451 MESA FORGED MONOBLOCK 18X9 8X165.1 RAW MACHINED

Only representative entries from the 32-row T163H170-8-H65-P1 result are printed here; omission or inclusion of a wheel does not replace code matching. When auditing T163H170-8-H65-P1, keep the fields separated: 20X9, 17X8.5, 20X10, 17X9, 18X9, and 18X8.5 records wheel size, 8X165.1, and 8X180 records bolt pattern, and MACHINED, RAW MACHINED, and GLOSS SILVER W/ MACHINED FACE records wheel finish.

Inspect an original before selecting T163H170-8-H65-P1

  1. On the suspected T163H170-8-H65-P1 original, remove loose dirt gently until the entire reverse-side code can be read.
  2. Expose the back of the T163H170-8-H65-P1 candidate with a non-damaging removal method appropriate to the wheel and cap construction.
  3. Do not force a T163H170-8-H65-P1 conclusion from appearance; an unclear code calls for additional photographs and measurements supplied to support.
  4. After T163H170-8-H65-P1 matches, review listing photos and notes for attachment layout, finish, hardware, condition, and sold quantity.
  5. Confirm that the reverse-side string equals T163H170-8-H65-P1 in full; a missing suffix or changed letter keeps the match unresolved.

Interpret the T163H170-8-H65-P1 reference image

Image handling for T163H170-8-H65-P1 uses the category associated wheel style reference, separating product photography from wheel-style context. Do not use the T163H170-8-H65-P1 image to bridge a code mismatch; finishes, center emblems, and proportions can look alike across different parts.

Decision cautions for T163H170-8-H65-P1

  • Read the current T163H170-8-H65-P1 listing for sold quantity and included pieces instead of assuming a set.
  • Do not discard the original before T163H170-8-H65-P1 can be compared side by side after delivery.
  • Do not choose T163H170-8-H65-P1 merely because the emblem and visible finish appear similar.
  • A complete-wheel size in the T163H170-8-H65-P1 records is not a measurement of the cap.
  • A bolt pattern listed beside T163H170-8-H65-P1 describes a wheel row and cannot prove cap compatibility.

Review the live T163H170-8-H65-P1 listing

Use the live listing for KMC T163H170-8-H65-P1 when checking present product photos, stock status, condition, price, and quantity. If another code appears on the old cap, use site search for that exact marking instead of forcing a T163H170-8-H65-P1 match. Unclear evidence for T163H170-8-H65-P1 can be sent through the contact page with readable close-ups of every code and clip.

Questions about T163H170-8-H65-P1

Does a linked wheel style prove the cap?

No. The T163H170-8-H65-P1 style labels organize WheelPros records, while the complete identifier on the original remains the purchase evidence.

Can a bolt pattern identify this replacement?

No. Keep T163H170-8-H65-P1 bolt data in the catalog-context column; exact cap identification still comes from the original marking.

What if the original code is unreadable?

Leave T163H170-8-H65-P1 unconfirmed and document the original with well-lit straight-on photographs, including every partial code and retention feature.

Back to blog