1007-04BLD Center Cap Guide | Fuel UTV

This Fuel UTV research page is organized around 1007-04BLD, the exact center-cap identifier that should be copied from the reverse of the cap being replaced. This 1007-04BLD guide draws from 4 exact catalog matches and 4 distinct WheelPros wheel SKU references. The role of the 1007-04BLD dataset is traceability, not a claim that any vehicle or visually similar wheel accepts this cap.

1007-04BLD evidence profile

Reviewers of 1007-04BLD will find 2 distinct WheelPros style labels: FV832 CYCLE UTV, and FV866 PISTON UTV; a name alone never confirms the cap. Counting wheel-level fields for 1007-04BLD gives 1 size value, 1 bolt-pattern value, and 1 finish value, not center-cap specifications. A row-level check for 1007-04BLD can begin at wheel SKU FV866MB15704438, described by FV866 PISTON UTV, 15X7, 4X156, and MATTE BLACK W/ GLOSS BLACK LIP.

Representative WheelPros rows for 1007-04BLD

The 1007-04BLD evidence table surfaces examples from 4 exact source rows and deliberately stops short of an application promise. The 1007-04BLD rows may show sizes 15X7, bolt notations 4X156, and wheel finishes MATTE BLACK W/ GLOSS BLACK LIP; none of those fields states cap dimensions.

1007-04BLD record fingerprint

The product-specific trace for 1007-04BLD can be summarized by FV866MB15704438, cataloged as FV866 PISTON UTV in 15X7, 4X156, and MATTE BLACK W/ GLOSS BLACK LIP. Beyond FV866MB15704438, the 1007-04BLD result has 4 matching rows, 4 distinct wheel SKUs, 2 styles, and 1 finish. This 1007-04BLD combination documents source scope without promising application.

Inspect an original before selecting 1007-04BLD

1. Clean the 1007-04BLD candidate only as needed to reveal molded, stamped, printed, or labeled characters.
2. Expose the back of the 1007-04BLD candidate with a non-damaging removal method appropriate to the wheel and cap construction.
3. Leave the identification open if 1007-04BLD is absent or unreadable, then photograph the face, profile, reverse, and retention system.
4. Only following an exact 1007-04BLD code match should the product-page images, retention details, condition, and quantity be compared.
5. Set the old code beside 1007-04BLD and verify each dash, digit, prefix, and revision character one position at a time.

Interpret the 1007-04BLD reference image

For transparency, 1007-04BLD identifies the image as associated wheel style reference rather than implying a different subject. Do not use the 1007-04BLD image to bridge a code mismatch; finishes, center emblems, and proportions can look alike across different parts.

Decision cautions for 1007-04BLD

• Keep 1007-04BLD unconfirmed when the only agreement is face design or color.
• Do not discard the original before 1007-04BLD can be compared side by side after delivery.
• Check the live 1007-04BLD product record for quantity, condition, price, and availability at ordering time.
• A bolt pattern listed beside 1007-04BLD describes a wheel row and cannot prove cap compatibility.
• Never read associated wheel dimensions as physical measurements for cap 1007-04BLD.

Review the live 1007-04BLD listing

Open the Fuel UTV 1007-04BLD product listing to review current media, condition, price, availability, and sold quantity. Use the 1007-04BLD search result only for an exact code match; otherwise search the marking actually found. Unclear evidence for 1007-04BLD can be sent through the contact page with readable close-ups of every code and clip.

Questions about 1007-04BLD

Does a linked wheel style prove the cap?

No. Wheel style terminology connected to 1007-04BLD helps research the record set; it does not confirm an application.

Can a bolt pattern identify this replacement?

No. The 1007-04BLD bolt patterns belong to complete-wheel rows, so they cannot identify a center cap or establish vehicle fitment.

What if the original code is unreadable?

Treat 1007-04BLD as unresolved until clear photographs or another source reveals the full original identifier without guesswork.